Electric spark machine (Cold welding machine)

Favorites Email to a friend Date: 14/12/2013

The heat ray is consulted: 13585964008 electric spark machine ( Cold welding machine) Can ing, hole sealing, mends present defects such as abrading, scratching, crackle, defect hardness reducing, trachoma, damaging out of shape,etc. and go on in depositing, hole sealing, mends to the metal work piece equally and repairs the functioning. Easy to operate, low heat input, there is no heat input in the course in the twinkling of an eye of build-up welding, therefore the mould does not anneal invariantly and, undercut and residual stress, do not change the mould or products metal to organize the state. It is high to repair the precision, coating thickness is from several microns to several millimetres, need only polish, polish. Can also carry on all kinds of machine works such as the car, milling, planing, rubing,etc., and electric plating,etc. is processed on later stage. Characteristic a of the apparatus) The mould, the work piece has not annealed and out of shape: The mould, the work piece does not need to preheat, there is no heat input in the course in the twinkling of an eye of build-up welding, it is out of shape therefore does not have, undercut and residual stress, will not produce the part and anneal, does not change the mould or products metal to organize the state. b)It is high to weld the intensity: Fully permeate through the surface of mould material, produce strong binding force. c)It is high to repair the precision: The thickness of build-up welding is from several microns to several millimetres, only need to polish, polish, there is no colour difference after mending. d)Of multiple use: Can carry on build-up welding, functions such as surface ruggedization,etc.. Discharge power and discharge through the intersection of controller and section frequency can obtain build-up welding and thickness and cleanliness of ruggedization that require. e)Environmental protection: There is not any pollution in the working phase. f)Using: Anyone is easy to use, the difficult place to weld can also carry on build-up welding. g)Economy: Repair at once on the scene, raise production efficiency, saves * accommodations of expenses: Punch dieForging die The note is moulded Mould Casting die Metal products Machine spare part Tool 1)Applicable material aluminum, the aluminum alloy is copper, copper alloy low carbon steel, medium carbon steel, die steel, carbon steel, stainless steel all steel, half steel cast steel, casting iron, cast aluminium, carbon tungsten gold,etc, and all all right conductive electric conductors. 2)Defect repaired Pin hole, air vent Burr, flying at the side Knock against, scratch Break out the angle, collapse Sand hole, crackle Abrasion, invagination Make the mistake, manufacturing defect, weld defect 3)Defective placement repaired Closed angle, sharp edge Ditch groove, sidewall Bottom, deep lumen Level, typing The production operation is repaired live on the line

TAG: electric Electric machine Machine spark Spark
Previous Next