Copper-aluminium presses and casts the defect to mend the cold welding machine - Electric Power Profession Equipment Product

Copper-aluminium presses and casts the defect to mend the cold welding machine

Favorites Email to a friend Date: 13/12/2013

Welcome messengers to call to consult, or send samples and try repairing. Three is shut to the cold welding machine consultation hot line grandson Jiang Xiu: 13480045158 accurate moulds mend the cold welding machine (cast the defect and mend the cold welding machine, the metal defect repairing machine) Can abrade the metal work piece, defects such as scratching, air vent, crackle, defect hardness reducing, trachoma, damaging out of shape,etc. go on in depositing, hole sealing, mends equally and repairs the functioning. Easy to operate, low heat input, there is no heat input in the course in the twinkling of an eye of build-up welding, therefore the mould does not anneal invariantly and, undercut and residual stress, do not change the mould or products metal to organize the state. It is high to repair the precision, coating thickness is from several microns to several millimetres, need only polish, polish. Can also carry on all kinds of machine works such as the car, milling, planing, rubing,etc., and electric plating,etc. is processed on later stage. The apparatus is advanced and reliable, Germany's native technology, the high-power argon shield of the international level, can work for a long time.

Applicable substrate:

Including low carbon steel, medium carbon steel, die steel, stainless steel, tool steel, casting iron, cast steel, cast aluminium, aluminum alloy, copper alloy, nickel alloy, carbon tungsten alloy,etc., and all all right conductive electric conductors.

Realize cold welding ' Heat input is low) :

Why can realize cold welding, as shown in Fig. 2, discharge time (Pt) With discharging for spacing interval (It) the next time Compare extremely short, the machine has sufficient relative deceleration time, heat will spread to the external world through the mould element body, so the processing the placement of the mould will have no gathering of heat. Though the intensification of the mould nearly stays at the room temperature, it is because of the melted reason of the instant, the most advanced temperature of the electrode can reach about C of 25000 degrees.

1,Manufacturing of mould

The superficial making the hair of plastic model, increase aesthetic feeling and life time; The helmet plastic mould divides the build-up welding of molded base to repair; The aluminum alloy press-casts the current divider awl surface ruggedization of the mould; Repairing and ruggedization such as the lumen overproof of the mould, abrading, scratching.

2,Plastic rubber industry

The rubber and plastic mechanical spare part is repaired, the mould overproof that the rubber, plastic member use, abrading and mending.

3,Aviation, spaceflight industry

Plane engine spare part, turbine, turbo shaft are repaired or mended, the rocket spray nozzle surface ruggedization is repaired, the plane planking part is repaired, the ruggedization of guest who is not a relative of the artificial satellite or repair, some cementation ruggedization of the titanium alloy one, some cementation ruggedization of the iron-base superalloy one, the surface of the magnesium alloy oozes anticorrosion such as A1 to coat, a piece of some defective build-up welding of magnesium alloy is mended, the nickel base / some build-up welding of work piece of superalloy blade of the cobalt base is repaired, for instance: Blade leaf precededding the damping and ablation of leaf pointed abrasion and guide blade,etc..

4,Manufacture and maintenance trade of car and locomotive
In car making and maintenance industry, are used in the cam, crankshaft, piston, cylinder, brake disc, the impeller, the wheel is enclosed, clutch, friction slice, exhaust valve,etc. make up the difference and repair, mend flat revision in surface bead defect of the body of car.

5,Vessel, power industry
Electric crankshaft, shaft sleeve, axle bush, electric element, resistor,etc. are repaired, the welding of electric locomotive wheel and bottom margin orbit connection lug, the making of conductive roller, metal oxidation treatment copper-aluminium electrode of electroplating factory is welded.

6,Mechanical industry
Revise overproof work piece and repair lathe guide rail, various axles, cam, hydraulic press, hydraulic press ram, angry casing wall, journal, pitching the central spindle, internal gage, ring gauge, all kinds of rollers, poles taken shape for roller, gear, belt pulley, spring,

7,Cast industry

The repair of defects such as the iron, copper, aluminium casting sand hole air vent,etc., aluminium model is abraded and repaired.

8,Chemical industry
The reactor can be burnt on wear-resisting anti-corrosion layer while stiring axle and thick liquid. Use the machinable pump ram of this method, pump impeller, sealing surface, valve stem, valve plug, air blower blade, crosshead of the compressor of the shell of the pump, sealing ring, shaft sleeve, valve, able to bear ram impeller of the acid pump, bush and ring

TAG: and And AND casts Cold cold defect Defect machine Machine mend Mend presses to To TO welding Welding
Previous Next

Related Content